Guide

How to Set Up a Robot Vacuum the Right Way

A good first map makes the difference between a robot you love and one that gets stuck every day. Here's how to set one up properly in about an hour.

Topic: Robot vacuums & mops · Start here: How robot vacuums work

As an Amazon Associate we earn from qualifying purchases. If you buy through links on this page we may earn a commission, at no extra cost to you. It never affects our rankings. Read our disclosure.

  1. Place the dock

    Hard, level floor against a wall, with about 50 cm clear in front and 10–15 cm either side. Near Wi-Fi, away from stairs and direct sunlight.

  2. Charge and update

    Let the robot charge fully, then install the app and update firmware before mapping.

  3. Connect to Wi-Fi

    Use a 2.4 GHz network. Create a strong, unique account password and turn on two-factor authentication if offered.

  4. Prepare the floor

    Pick up cables, socks and small items. Open every door you want mapped. Tuck rug fringes under.

  5. Run a mapping pass

    Most apps offer a fast "map only" run. Stay nearby the first time in case it gets stuck.

  6. Edit the map

    Split and name rooms, mark carpets, and draw no-go zones around pet bowls, cable nests and anywhere it gets stuck. Add no-mop zones around rugs.

  7. Choose settings per room

    Quieter suction on hard floors, carpet boost on rugs, low water on wood.

  8. Schedule it

    Daily runs when you're out work best. Set do-not-disturb hours for the dock.

Multi-floor homes: map each floor separately and let the robot recognize which floor it's on. Keep the dock on the floor you clean most.

If it keeps getting stuck after setup, see robot vacuum getting stuck fixes. Concerned about what the app collects? Read robot vacuum privacy. Want voice control? See the best robot vacuums for Alexa and Google Home. Got a cat or dog? Read how to introduce a robot to pets.

Prices change often on Amazon. Check the live price before you buy.

Frequently asked questions

Why won't my robot vacuum connect to Wi-Fi?

Most robots need a 2.4 GHz network. If your router combines 2.4 and 5 GHz under one name, temporarily separate them or move closer to the router during setup.

Should I map with lights on?

For camera-based robots, yes. LiDAR robots map in any light.

Keep reading

About the author: The Best Cleaning Robots Team

We research robot vacuums, robot mops and other cleaning robots the slow way: manufacturer spec sheets and manuals, independent hands-on reviews, owner forums and long-term owner reports. No brand pays for placement in our rankings.

Read our review methodology and affiliate disclosure.